Home > PRODUCTS > Image&Picture Equipment > Sigma

1) ASM-1616 Audio Switch Module





INPUT

Inputs - 16
Impedance - 15 kΩ, unbalanced
Level - +18 dBu maximum
Connectors - RCA

OUTPUT  
Outputs - 16
Level - +21 dBu max. into HiZ
+18 dBu into 600Ω
Freq. Response - ± 0.2dB 20 Hz to 100 kHz
Hum & Noise - -95 dBu, 20 kHz bandwidth
THD - 0.03% max. @ +18 dBm, worst case
Crosstalk - 90 dB @ 1 kHz worst case
70 dB @ 20 kHz worst case
Gain - Unity, ± 0.2 dB into 600Ω
Connectors - RCA

2) ASM-168 Audio Switch Module





INPUT

IInputs - 16
Impedance - 15 kΩ, unbalanced
Level - +18 dBu maximum
Connectors - RCA

OUTPUT  
Outputs - 8
Level - +21 dBu max. into HiZ
+18 dBu into 600Ω
Freq. Response - ± 0.2dB 20 Hz to 100 kHz
Hum & Noise - -95 dBu, 20 kHz bandwidth
THD - 0.03% max. @ +18 dBm, worst case
Crosstalk - 90 dB @ 1 kHz worst case
70 dB @ 20 kHz worst case
Gain - Unity, ± 0.2 dB into 600Ω
Connectors - RCA

3) ASM-88 Audio Switch Module





INPUT

IInputs - 8
Impedance - 15 kΩ, unbalanced
Level - +18 dBu maximum
Connectors - RCA

OUTPUT  
Outputs - 8
Level - +21 dBu max. into HiZ
+18 dBu into 600Ω
Freq. Response - ± 0.2dB 20 Hz to 100 kHz
Hum & Noise - -95 dBu, 20 kHz bandwidth
THD - 0.03% max. @ +18 dBm, worst case
Crosstalk - 90 dB @ 1 kHz worst case
70 dB @ 20 kHz worst case
Gain - Unity, ± 0.2 dB into 600Ω
Connectors - RCA

4) SBC-16 Single Bus Control Panel 16 x 1





Features

Interface - Button per source
Control levels - 4, follow mode only
select any or all 4 levels
Take - AutoTake
Connection - BNC/Coax, 2000 feet max.
Type - Rack Mount
Requires 4 rack screws

General  
Required SCI module - SCI-2144
Sigma Systems - Lite, HPX, Micro
Use - 16 x 1 systems that require
button per source, follow mode
Power - 9 Vdc 300mA, wall xfmr
Mechanical - 1 RU, 1.75" H x 19" W x 3" D

5) SBC-8 Single Bus Control Panel 8 x 1





Features

Interface - Button per source
Control levels - 4, follow mode only
select any or all 4 levels
Take - AutoTake
Connection - BNC/Coax, 2000 feet max.
Type - Rack Mount
Requires 4 rack screws

General  
Required SCI module - SCI-2144
Sigma Systems - Lite, HPX, Micro
Use - 8 x 1 systems that require
button per source, follow mode
Power - 9 Vdc 300mA, wall xfmr
Mechanical - 1 RU, 1.75" H x 19" W x 3" D

6) SYC-1616 Master X-Y Control Panel 16 x 16





Features

Interface - Button per source
Button per destination
Control levels - 4, follow mode only
select any or all 4 levels
Take - AutoTake
Connection - BNC/Coax, 2000 feet max.
Type - Rack Mount
Requires 4 rack screws

General  
Required SCI module - SCI-2144
Sigma Systems - Lite, HPX
Use - 16 x 16 systems that require
button per source / destination
Power - 9 Vdc 300mA, wall xfmr
Mechanical - 2 RU, 3.5" H x 19" W x 3" D

7) SYC-168 Master X-Y Control Panel 16 x 8





Features

Interface - Button per source
Button per destination
Control levels - 4, follow mode only
select any or all 4 levels
Take - AutoTake
Connection - BNC/Coax, 2000 feet max.
Type - Rack Mount
Requires 4 rack screws

General  
Required SCI module - SCI-2144
Sigma Systems - Lite, HPX
Use - 16 x 8 systems that require
button per source / destination
Power - 9 Vdc 300mA, wall xfmr
Mechanical - 2 RU, 3.5" H x 19" W x 3" D

8) SYC-16S Full Status Master X-Y Control Panel 16 x 16





Features

Interface - Button per source
Button per destination
Control levels - 4, follow mode only
select any or all 4 levels
Take - AutoTake
Connection - BNC/Coax, 2000 feet max.
Type - Rack Mount
Requires 4 rack screws

General  
Required SCI module - SCI-2144
Sigma Systems - Lite
Use - 16 x 16 systems
that require full status display
Power - 9 Vdc 300mA, wall xfmr
Mechanical - 2 RU, 3.5" H x 19" W x 3" D

9) SYC-88 Master X-Y Control Panel 8 x 8





Features

Interface - Button per source
Button per destination
Control levels - 4, follow mode only
select any or all 4 levels
Take - AutoTake
Connection - BNC/Coax, 2000 feet max.
Type - Rack Mount
Requires 4 rack screws

General  
Required SCI module - SCI-2144
Sigma Systems - Lite, HPX
Use - 8 x 8 systems that require
button per source / destination
Power - 9 Vdc 300mA, wall xfmr
Mechanical - 1 RU, 1.75" H x 19" W x 3" D

10) VSM-1616 Video Switch Module





INPUT

Inputs - 16, 75Ω , terminated
Coupling - AC
Level - 1.4 V p-p maximum
Gain Variation - ±0.2dB
Gain Setting - Adjusted for unity
Return Loss - 30dB @ 5 MHz
Connectors - BNC

OUTPUT  
Outputs - 16, 75Ω Impedance
Level - 1.4 Vp-p maximum
Bandwidth - 20 MHz
Differential Phase - 1° max., 10-90%APL
Differential Gain - 0.5% max., 10-90%APL
Tilt, Field, & Line - 1% maximum
Freq. Response - ± 0.5 dB, 50 Hz to 5 MHz
Crosstalk - 50 dB min. to 5 MHz
Hum & Noise - 70 dB min. below 1V p-p
Connectors - BNC

11) VSM-168 Video Switch Module





INPUT

Inputs - 16, 75Ω , terminated
Coupling - AC
Level - 1.4 V p-p maximum
Gain Variation - ±0.2dB
Gain Setting - Adjusted for unity
Return Loss - 30dB @ 5 MHz
Connectors - BNC

OUTPUT  
Outputs - 8, 75Ω Impedance
Level - 1.4 Vp-p maximum
Bandwidth - 20 MHz
Differential Phase - 1° max., 10-90%APL
Differential Gain - 0.5% max., 10-90%APL
Tilt, Field, & Line - 1% maximum
Freq. Response - ± 0.5 dB, 50 Hz to 5 MHz
Crosstalk - 50 dB min. to 5 MHz
Hum & Noise - 70 dB min. below 1V p-p
Connectors - BNC

12) VSM-88 Video Switch Module





INPUT

Inputs - 8, 75Ω , terminated
Coupling - AC
Level - 1.4 V p-p maximum
Gain Variation - ±0.2dB
Gain Setting - Adjusted for unity
Return Loss - 30dB @ 5 MHz
Connectors - BNC

OUTPUT  
Outputs - 8, 75Ω Impedance
Level - 1.4 Vp-p maximum
Bandwidth - 20 MHz
Differential Phase - 1° max., 10-90%APL
Differential Gain - 0.5% max., 10-90%APL
Tilt, Field, & Line - 1% maximum
Freq. Response - ± 0.5 dB, 50 Hz to 5 MHz
Crosstalk - 50 dB min. to 5 MHz
Hum & Noise - 70 dB min. below 1V p-p
Connectors - BNC

13) SCI-2144 System Control Interface Module




SPECIFICATIONS

Data Transmission System - RS-232 or RS-422
Serial Port Baud Rate - Up to 38,400 baud
Control Levels - Four
Communication Line - Coaxial, up to 2000 feet
External Sync Reference - Comp Sync or Blackburst
Control Panels - Up to 16 on Comm. Line
Connectors - BNC for Comm. Line
9 Pin "D" for Serial Port


14) SS-2100-16Plus 3RU Frame & PS





DESCRIPTION

Type - Rack Mount
Capacity - 17, 2100 Series card slots
Dimensions - 5.25"H x 19"W x 9.5"D(134 x 483 x 242 mm)
Weight - 12 lb. (5.5 kg), empty

POWER REQUIREMENTS
Internal Supply - FPS-2100 (included)
120 VAC, 50/60 Hz
Optional Supply - FPS-2101 (request)
230 VAC, 50/60 Hz
Consumption - 100 W


VDA-2602 x 3 - Dual 1 x 3 Video for Wideband Video - 110 MHz signals





INPUT

Two (2), 75Ω , term.
AC coupled
Level - 1.4 V p-p max.
Return Loss - 35 dB
Gain Range - ± 1.5 dB
Connectors - BNC

OUTPUT
Two sets of 3, 75Ω , source terminated
Bandwidth - 110MHz
Differential Phase - 0.1° to 5 MHz
Differential Gain - 0.1% to 5 MHz
Tilt - 1% maximum
Freq. Response - ± 1 dB to 75 MHz
Group Delay - 3 nsec to 25 MHz
Return Loss - 35 dB to 10 MHz


TSG-470 Master Sync Generator





SPECIFICATIONS

Master Sync Outputs

Subcarrier (1) - 3.579545 MHz, ±3 Hz
Blackburst (4) - 7.5 IRE of Set-up, 40 IRE of Burst, per RS-170A
Pulse Outputs (1 each): Each @ 4 V p-p ±10%, negative going
Composite Sync - Risetime of 140 nsec, ±20 nsec
Composite Blanking - Output impedance is 75W
Burst Flag - (Internal Jumper for 1 Vp-p selection)
Connectors - BNC

Test Outputs (1 NTSC, 1 Y/C)
Front Panel Selectable:
SMPTE Bars - SMPTE EG 1-1990
Color Bars (full field) - 100%, 95%, 75%, EBU all with or without split Red Field
Bowtie - 2 patterns
Window - 100 IRE white, select bounce 7.5 and 100 IRE, 1 sec. rate
50 IRE gray
7.5 IRE black, select bounce 7.5 and 100 IRE, 1 sec. rate
S-Pluge - 100 IRE, 65 IRE, 35 IRE, 20 IRE, 10 IRE, 7.5 IRE, 5 IRE
Crosshatch - 2 Patterns, 26 lines V x 15 line H, 20 lines V x 15 lines H
Field Square Wave - 3 Patterns, 50% White (100 IRE), 50% Black (7.5 IRE)
Color Checker - Color squares, 6 squares Vert. x 8 squares Horiz.
Ramp & Step - 5 patterns (5 & 10 step, ramp) Luminance only 5 patterns
APL - 5 patterns each at 87.5% or 12.5%, modulated & unmod.
Multiburst - 2 patterns, 5 step 500 KHz to 4 MHz,
Pulse & Bar - 4 patterns
Multitest 1 & 2 - 11 various patterns, VITS and Discriminator
Sweep - 2 patterns, Line rate
Pathological - Future use.
Legal Ramp
Safe Area - 5 patterns
Video Connectors - BNC, Y/C
Audio Tone - 400 Hz or 1KHz ±5%, 0 or +8 dBm, Continuous or Pulsed
Connector - 9 Pin D subminiature, female
Genlock
Input - Hi Z, Loop, 1 V p-p nom., blackburst or composite video
Horizontal Adjustment - Fine Line Adjust of up to ± 4 fields
Vertical Adjustment - Coarse Field Adjust of up to ± 4 Fields, 1 H line steps
Subcarrier Adjustment - 0° to 360°
Connector - BNC
Identification
Number of IDs - 3 ID's, each assignable up to 28 characters
Display Modes - 5 mode selection of single ID display or all 3 IDs .
3 modes of single ID, On (stationary), Roll, or Flash
2 modes scroll through all IDs, Multi-Roll, or Multi-Flash
Dimensions - 1.75"H x 19"W x 15"D
Weight - 13 lbs. (unit), 17 lbs. (shipping)
Power Requirement - 120 VAC ± 10%, 50/60 Hz.
Warranty
The TSG-470 Test and Sync Generator is covered by
Sigma Electronics two year parts and labor warranty.