» Ambience Series/ PowerMAXSeries / Installer Series / MicroMAX Series / SPL Series / Concert Series / EQualizers «

 

Ambience1

Frequency Response	60Hz-20KHz +-5dB
Impedance	Standard 8 Ohms
Recommended amplifier power	75 Watts program
Sensitivity	86dB
Dispersion	120"V × 120"H, -6dB down
Maximum Dimensions	225H × 150W × 150D(mm)

Ambience5

Frequency Response	50Hz-20KHz+-5dB
Impedance	Standard 8 Ohms
Recommended amplifier power	150 Watts program
Sensitivity	89dB
Dispersion	120"V × 120"H, -6dB down
Maximum Dimensions	400H × 260W × 220D(mm)

 

PowerMax2 / PowerMax4

Components	1 × ARX Pro series 15" (380mm) Bass driver. 1 × ARX Ferrofluid cooled 1" throat compression driver on a Noryl CD horn flare
Frequency Management	Internal 24dB per octave crossover on fiberglass PCB
Control Unit	PowerPRO ll dual channel plus Sub speaker processor
Frequency Response	45 Hz - 18 KHz ±5dB
Impedance	8 Ohms nominal
Minimum Amplifier Power	300W RMS @ 8 Ohms
Dispersion	90'H × 75'V (Mid/High)
Sensitivity	99dB. 1 watt. 1 metre
Maximum SPL	124+ dB
Weight	27 kg(60lbs)
Connectors	2 × male XLR or Neutrik Speakon. on recessed steel plate
Cabinet	All plywood construction. catalyzed paint. sculpted steel mesh grille. speaker stand insert. handles. Trapezoidal. 7' taper per side(Max2) Multi angle stage monitor wedge 30', 60', 90' (Max4)
Accessories	Optional flying points and hardware. folding tripod speaker stands
Processor Type	ARX PowerPRO ll or PowerDrive Integrated system amplifier

 

122SK

Frequency Response	180Hz-20KHz ±5 dB
Impedance	High 16 ohma Mid 8 ohms
Recommended amplifier power	High 300 W/8 ohm minimum Mid 300 W/8 ohm minimum
Dispersion -6dB points	90' × 50'
Sensitivity	105 dB @ 1 Watt. 1 metre
Maximum SPL @ 1 metre	130 dB+
Connectors	Push on spade terminal connectors
Construction	moulded fibreglass flare
Maximum Dimensions	21"H 18"W 17"D 530 × 460 × 435 mm
Compatibility	ARX 925 Low frequency speaker ARX 218 Extended Low Frequency speaker

 

922EM

Frequency Response	100Hz-20KHz ±5 dB
Impedance	Mid/High 8 ohms
Recommended amplifier power	M/high 300 W/8 ohm minimum
Dispersion -6dB points	90' × 50'
Sensitivity	107 dB @ 1 Watt. 1 metre
Maximum SPL @ 1 metre	130 dB +
Connectors	2 × Neutrik Speakons. 2 × EP4 Male optional
Construction
Maximum Dimensions	22"H × 20"W × 22"D 585 × 515 × 585 mm
Compatibility	ARX 925 Low frequency speaker ARX 218 Extended Low Frequency speaker

 

MicroMAX / MicroSUB

MicroPRO

Frequency Response	60Hz-20KHz +-5dB(M-MAX) 35Hz-100Hz +-5dB(M-SUB)
Input Impedance	8 Ohms(M-MAX) 4 Ohms(M-SUB)	20 KOhms balanced
Recommended amplifier power	100 Watt(M-MAX)200Watt(M-SUB)
Impedance Standard Version	8 Ohms (M-MAX) 4 Ohms(M-SUB)
Sensitivity @ 1 Watt. 1 Metre	92dB(M-MAX)95dB(M-SUB)
Maximum SPL @ 1 metre	118dB. 120dB
Connectors	XLR or Speakon
Maximum Dimensions	MicroMAX 380H × 275W × 275D mm MicroSUB 770H × 330W × 410D mm
Maximum Input/Output Level		+20 dB
Output Impedance		150 Ohms unbalanced
Signal/Noise Ratio		-90 dB input grounded
Dynamic Range		110 dB
Distortion @ +4dB 1kHz		.008% THD
Crossover Frequency		100 Hz (to SUB Out)
ISC Returns		100K differential Inputs

SPL 8

SPL 10

Frequency Response	80Hz-20KHz +/- 4 dB	80Hz-20KHz +/- 4 dB
Loudspeaker type	Low Frequency 8" 205mm 8 Ohm High Frequency 8 Ohm;FerroCooled	Low Frequency 10" 255mm 8 Ohm High Frequency 1" (25mm)throat 8 Ohm;FerroCooled
HF Flare type	Integral radial waveguide	Co-axial Radial waveguide
Size	450H×275W×340D, 7.5' taper to back	435H×330W×328D, 7.5' taper to back
Weight	22kg	28Kg
Dispersion	Nominal 120'H×120'V	Nominal 75'H×75'V
Input Impedance	44K Balanced	44K Balanced
Nominal input level	0dB for nominal rated amplifier output	0dB for nominal rated amplifier output
Crossover Frequency	1800Hz	1500Hz
Crossover Type	24dB Linkwitz Riley Filter type	24dB Linkwitz Riley Filter type
Highpass Filter	-3dB @ 75Hz 24dB Linkwitz Riley	-3dB @ 75Hz 24dB Linkwitz Riley
Maximum SPL	124peak, 118 continuous	128 peak, 122 continuous
Amplifier power	120 Watts RMS 8 ohms, 280 peak	250 Watts RMS 8 ohms, 350 peak
Amplifier type	Lateral Mosfet	Lateral Mosfet
THD	<.01%	<.01%
AC Power	Preset : 110V / 220V / 240V 50/60Hz	110V / 220V / 240V 50/60Hz
AC Wattage Max	300 VA (300Watts)	550 VA (550Watts)

 

SPL 12

SPL 18

Frequency Response	50Hz-20KHz +/- 4 dB	35Hz-100KHz +/- 4 dB
Loudspeaker type	Low Frequency 12" 305mm 8 Ohm/High Frequency 50mm voice coil 16 Ohm; FerroCooled	18" 450mm 8 Ohms
HF Flare type	Flat Front Consistent Beamwidth
Size	610H ×405W × 395D, 7.5'taper to back	845H × 540W × 585D
Weight	35Kg(80 lbs)	60 Kgs
Dispersion	Nominal 90'H × 40'V
Input Impedance	44K Balanced(electronic)	44K Balanced (electronic)
Nominal input level	0dB for nominal rated amplifer outputs	0dB for nominal rated amplifier outputs
Sub Level Control		-10dB to +6dB, detented for 0dB
Phase Reverse		Normal or 180' reversed
Crossover Frequency	1500Hz	100Hz
Crossover Type	24dB Linkwitz Riley Filter type	24dB Linkwitz Riley filter type
Highpass Filter	-3dB @ 75Hz 24dB Linkwitz Riley Plus Switchable Sub/Full range response curves	-3dB @ 35Hz 24dB Linkwitz Riley
Maximum SPL	130 peak, 127 continuous	128peak, 125 continuous
Amplifier power	LF 300 Watts RMS 8 ohms, 525 peak HF 150 Watts RMS 16 ohms, 300 peak	400 Watts RMS 8 ohms, 625 W peak
Amplifier type	Lateral Mosfet	Lateral Mosfet
THD	<.0.1%	<.0.1%
AC Power	110V / 220V / 240V 50/60Hz	110V / 220V / 240V 50/60Hz
AC Wattage Max	550 VA (550 Watts)	600 VA (600 Watts)

SPL 30

SPL 32

Frequency Response	50Hz-20KHz +/- 4 dB	45Hz-120KHz +/- 4 dB
Loudspeaker type	Low Frequency - Refex loaded 15" 380mm 8 Ohm Mid Frequency - Horn loaded 8" (200mm) 8 Ohm High Frequency - Horn loaded 2" throat driver 16Ohm	Reflex loaded low frequency design with 2 × 15"(380mm) 8 Ohm drivers
HF Flare type	Flat Front Consistent Beamwidth
Size	910H × 470W × 585D, 7.5˚ taper to back	910H × 470W × 585D, 7.5˚ taper to back
Weight	60Kg	60 Kg
Dispersion	Nominal 60˚H × 40˚V
Input Connector	3 pin Female XLR, polarity Pin 2 +, Pin 3-, Pin 1 Ground	2 × 3 pin Female XLR, polarity Pin 2+, Pin 3-, Pin 1 Ground
Input Impedance	44K Balanced (electronic)	44K Balanced (electronie)
Nominal input level	0dB for nominal rated amplifer outputs	0dB for nominal rated amplifier outputs
Input Loop connector	3 pin Male XLR, polarity Pin 2 +, Pin 3-, Pin 1 Ground	2 × 3 pin Male XLR, polarity Pin 2+, Pin 3-, Pin 1 Ground
Sub Level Control		-10dB to +6dB, detented for 0dB
Phase Reverse		Normal or 180˚ reversed
Crossover Frequency	500Hz, 2.5KHz	120Hz
Crossover Type	24dB Linkwitz Riley Filter type	24dB Linkwitz Riley filter type
Highpass Filter	-3dB @ 50Hz 24dB Linkwitz Riley	-3dB @ 45Hz 24dB Linkwitz Riley
Maximum SPL	134 peak, 126 continuous	134peak, 126 continuous
Amplifier power	LF 400 Watts RMS 8 ohms, 575 peak MF 200 Watts RMS 8 ohms, 350 peak HF 150 Watts RMS 16 ohms, 200 peak	2 ×LF 400 Watts RMS 8 ohms, 575 peak
Amplifier type	Lateral MosFet	Lateral MosFet
THD	<.0.1%	<.0.1%
Loudspeaker protection	ISC amplifier aniti-clipping circuitry Relay muted input Relay switched output sensing DC and RF error	ISC amplifier aniti-clipping circuitry Relay muted input Relay switched output sensing DC and RF error
AC Power	110V / 220V / 240V 50/60Hz	110V / 220V / 240V 50/60Hz
AC Power Input	Neutrik PowerCo type NAC 3 FCA	Neutrik PowerCo type NAC 3 FCA
AC Power Loop	Neutrik PowerCo type NAC 3 FCB	Neutrik PowerCo type NAC 3 FCB
AC Power protection	User resettable external circuit breaker	User resettable external circuit breaker
AC Wattage Max	1200VA (1200 Watts)	1200VA (1200 Watts)
Transformer type	Toroidal	Toroidal

SPL SUB18

Frequency Response	40Hz - 100Hz +/- 4dB
Loudspeaker type	18" 450mm 8 Ohms
Size	730H x 510W x 580D
Weight	60 Kgs
Input Connectors	3 pin Female XLR, polarity Pin 2 +, Pin 3 -, Pin 1 Ground
Input Impedance	44K Balanced (electronic)
Nominal input level	0dB for nominal rated amplifier outputs
Input Loop Connectors	3 pin Male XLR, polarity Pin 2 +, Pin 3 -, Pin 1 Ground
Sub Level Control	-10dB to +6dB, detented for 0dB
Phase Reverse	Normal or 180° reversed
Crossover Frequency	100Hz
Crossover Type	24dB Linkwitz Riley Filter type
Highpass Filter	-3dB @ 35Hz 24dB Linkwitz Riley
Maximum SPL	128 dB peak, 125 dB continuous
Amplifier power	400 Watts RMS 8 ohms, 625 W Peak
Amplifier type	Lateral MosFet
THD	<.0.1%
Loudspeaker protection	ISC amplifier anti-clipping circuitry, Relay muted input, Relay switched output sensing DC and RF error
Status LEDs	AC Power, Protection Active
AC Power	110V / 220V / 240V 50 / 60Hz
AC Power Input	Neutrik PowerCon locking type NAC 3 FCA
AC Power Loop	Neutrik PowerCon locking type NAC 3 FCB
AC Power Protection	User resettable external circuit breaker
AC Wattage	Max 600 VA (600 Watts)
Transformer type	Toroidal

 

212

215

Frequency Response	200Hz-20KHz ±5 dB	45Hz-20KHz ±5 dB
Impedance	Mid 8 ohms High 16 ohms	Low 8 ohms High 16 ohms
Recommended amplifier power	Mid 350 W/8 ohm min High 300 W/8 ohm min	Mid 400 W/8 ohm min High 200 W/8 ohm min
Sensitivity		Low 102 dB 1 W/1metre High 109 dB 1 W/1metre
Dispersion -6dB points	60' × 40'	90' × 40'
Efficiency/Axial Sensitivity	108dB @ 1Watt, 1metre averaged response over cabinet range
Maximum SPL @ 1 metre	134 dB +Peak 128 dB Long term	130 dB +
Connectors	2 × EP6Male 2 × Speakon Plus 2 × XLR	2 × EP4 Male sockets
Maximum Dimensions	40"H 20"W 22"D 1000 × 515 × 580 mm	18" × 30" × 18" 460 × 770 × 460 mm
Weight	70 Kgs (150 lbs)
Compatibility	ARX 922 Low cabinet ARX 218 Sub cabinet ARX 925 Full range system
Speaker Processor		ARX LSP-2

218

222

Frequency Response	35Hz-200Hz ±3 dB	50Hz-20Hz ±5 dB
Impedance	4 ohms or dual 8 ohm	Low 4 ohms High 16 ohms
Recommended amplifier power	700 W/4 ohm minimum	Low 600 W/4 ohm minimum High 200 W/8 ohm minimum
Sensitivity	104 dB @ 1 Watt, 1 metre	Low 104 dB 1 W/1metre High 109 dB 1 W/1metre
Dispersion -6dB points		90' × 50'
Efficiency/Axial Sensitivity
Maximum SPL @ 1 metre	130 dB+	130 dB+
Connectors	2 × EP6 Male sockets 2 × XLR(2×EP8 optional to replace EP6, depending on use) Neutrik Speakon connectors also an option	4 × EP4 or Speakon on unique 'BiPlane' panel
Maximum Dimensions	40"H 20"W 28" D 1000 × 515 × 720 mm	18" × 36" × 18 460 × 900 × 460 mm
Speaker Processor		ARX LSP-2
Construction	Premium grade void-free multi laminate plywood, steel mesh grille. Optional